Month: August 2016

3D Printer Upgrades for Prusa i3

My blog posts over the last year haven’t been as regular as I’d hoped, but hopefully it will change, at least temporarily for the next few weeks.

I own a Prusa i3 3D printer. It’s a great device, but I haven’t done half of the things I know it is capable of and have barely used it since I first got it but I’ve recently had some time to do some more with it and have had some great success following the previous issues that I had. I did somewhat jump in at the deep end with it, I knew nothing about 3D printers prior to this and I purchased a Prusa i3 kit because it was very cheap compared to other models available at the time. It was a self-build kit, all well and good as I am very technically minded and love a good project. What I wasn’t prepared for were the issues with getting it printing. The software is good and easy to understand, however trying to solve the various issues I had with it was another matter. Luckily, I discovered a local hackspace not too far from me and a awesome chap known as Dino, with his excellent knowledge of 3D printers helped iron out the issues and get it printing well.

Since then, I’ve printed quite a few items with great success, I get the odd hiccup from it but with my new found knowledge and the great online communities on Reddit and Facebook have proved so helpful with any issues I’ve had, and some insightful input on suggestions.

I’ve since decided to do a lot of upgrades to my printer which I’m very much looking forward to.

I will be upgrading the current E3D v6 hot end to a E3D Chimera which allows printing in two different colours or two different materials, something I think will offer some good options for prints I do in the future. For example, I could load up two different materials and not have to worry about changing filaments when I want to print with one or the other. I could also load two different colours as well, something that can have great results from what I’ve seen online. The Chimera hot end is a very compact unit which will significantly lower the weight of my X-carriage so there will be less movement on the frame of the printer from the reduced weight, and also it will allow me to speed up the printing process significantly.

Another upgrade that I’m very excited about is air cooling. At the moment, I’ve get just the bare minimum in terms of cooling. Just a single fan on the hot end is all I’ve got. No fan to cool the print, no fan to cool the electronics or power supply either. The stepper motor drivers currently run very hot which isn’t good for them and has on occasion caused some issues when printing larger items. As I’ve got a decent air compressor at home, a Jun Air silent dental compressor with built in air dryer, I thought this would be perfect for the job to keep a constand supply of cool air running over the various parts of the printer.

I’ve ordered what will hopefully be all the components I need to try this as well as a handful of extras. I managed to snag a 4 way solenoid air control valve on ebay which I think will be perfect to control air feeds to various parts of the printer. I will be running OctoPrint software from a Raspberry Pi computer to control the printer as it is, and this also gives me the flexibility for other automation as well so I could have a range of temperature sensors on different parts of the printer (the power supply, RAMPS board etc) and have the Raspberry Pi turn on/off the relevant air feed using the solenoid valve. I’ve ordered 100 meters of polyurethane tube to run from my compressor in the shed to my printer inside the house, that’s far more tubing than I will ever need but I couldn’t resist the 100 meter roll that was selling for less than many 20 meter lengths on ebay. I’ve got big ideas and I really hope it will be effective and inspire others to do the same.

I’ve so far printed many of the parts I will need for the upgrades such as bearing mounts, axis and motor mounts which are slightly different as I will also be changing the smooth rods on my axis to stainless steel ones (from mild steel, which is going rusty), and changing the regular threaded rods on the Z axis to use proper lead screws which are far better to use for this purpose, I found a very good guide to this upgrade including parts that had already been designed on this blog and have successfully printed those parts so now I’m just awaiting the metal parts that I have ordered.

More will follow with my progress on these various upgrades. I’ll try to actually put some pictures on the upcoming posts as well to act as a good reference source for others.

[Solved] PayPal Balance Does Not Show as a Payment Option on eBay

Another quick post today that may help other people.

Today I was making an eBay purchase and I wished to partly fund this transaction with my PayPal balance and have the remainder taken from my primary card. This is something I’ve done a number of times before without issue but today it was just not showing within the eBay checkout as an option.

I worked out the issue for me, which was that my PayPal balance was held in US Dollars, but my primary currency here in the UK is British Pound and it seems PayPal will only use a balance for a purchase in that currency (buying an item in dollars would work, but when buying an item in British pounds it would not be converted or used automatically.

I found a quick and easy solution, if you login to your PayPal account on the main PayPal website, click on the “PayPal Balance” link on the left hand side, and it provides a useful conversion tool where you can select the currency of your balance, type in how much you want to convert, and choose which currency you want to convert it to. Once converted to your primary currency (or the currency of the item you are purchasing), it will then show the balance as a payment option within the eBay checkout process.

I was initially very stumped by this but I figured it out in the end so I hope this will help others.

Griffin PowerMate Control Now Works with Windows 10

Just a quick post today. I’ve purchased a Griffin PowerMate Control Knob to use with my Windows 10 computer. There are hundreds of angry comments online that it apparently does not work with Windows 10.

I just wanted to clarify for anyone considering buying one, that they do indeed work with Windows 10, I’m not sure why so many people appear to have issues. I am running Windows 10 Professional 64 bit, I plugged the device into the USB port, Windows automatically installed the correct driver from Windows Update. I then downloaded the “XP & Vista” manager software from the Griffin website and installed it. The PowerMate then worked straight away to control the system volume, and opening the manager application allows you to customise the actions performed by the device. I’m currently using it to scroll through web pages and alter the volume but I’ll likely find more uses for it over the next few days.